True North Forge
Ness Half and Half Black Zirconium Ring
Ness Half and Half Black Zirconium Ring
Handmade to order in Scotland. Ships in approximately 14 days. Free UK tracked delivery
Couldn't load pickup availability
Handmade to order in our Scottish workshop using premium alternative metals.
Ness Half and Half Black Zirconium Ring
The Ness combines two contrasting finishes across a single Black Zirconium ring, with one half polished and the other satin to create a subtle change in appearance as the ring moves.
A fine 0.5mm groove runs around the centre of the band, creating a clean dividing line between the two surfaces. On one side, polished Black Zirconium reflects the light with a deep, glossy appearance; on the other, the satin finish diffuses it to create a softer, more muted black.
Handmade to order by Graeme in our Scottish workshop, the Ness is designed for those who like the simplicity of a plain Black Zirconium ring but want a little more visual detail.
Two Finishes, One Ring
The defining feature of the Ness is the contrast between polished and satin Black Zirconium.
One half of the ring is polished to create a smooth, highly reflective black surface, while the other is given a satin finish with a softer matte appearance.
A fine 0.5mm groove separates the two, adding definition while keeping the overall design clean and simple.
Because the finishes respond differently to light, the balance between polished and satin changes naturally as the ring moves.
What is Black Zirconium?
Zirconium begins as a naturally silver-grey metal.
During the making process, the ring is carefully heat treated. This causes the outer surface of the Zirconium to react with oxygen and form a hard, black zirconium oxide layer.
Unlike paint or plating, the black surface is created from the Zirconium itself rather than being applied as a separate coating.
The Ness then uses two different finishing techniques across that same black surface to create its characteristic half-and-half appearance.
Flat Profile
The Ness is made with a flat outer profile, providing a clean surface for the contrast between the two finishes.
The straight profile allows the polished and satin sections to remain clearly defined on either side of the central groove, while the interior is shaped and finished for comfortable everyday wear.
Built for Everyday Wear
Black Zirconium is lightweight, corrosion resistant and well suited to everyday jewellery.
The black zirconium oxide surface is extremely hard and, because it isn't a plated finish, it will not simply peel or flake away.
However, no jewellery material is impervious to wear. Black Zirconium can develop surface marks over time, and sufficiently deep scratches or impacts can expose the natural grey Zirconium beneath the black surface.
Removing your ring for heavy lifting, abrasive work or high-impact activities will help preserve its appearance.
Handmade to Order
Every Ness Half and Half Black Zirconium Ring is handmade by Graeme in our Scottish workshop and crafted specifically to your chosen size and width.
Available in sizes up to Z+6, including half sizes.
Engraving can be added to the inside of the band if selected.
Care
Clean your Black Zirconium ring using mild soap and warm water before drying thoroughly with a soft cloth.
Avoid abrasive cleaning products or harsh chemicals and remove the ring before activities likely to cause heavy impact or abrasion.
Included with Your Order
Free UK tracked delivery
Free ring sizer before we begin making your ring
Free engraving if selected
Ordering & Making Your Ring
What is the best alternative metal for a wedding ring?
There is no single best metal. It depends on your preference for weight, finish and appearance. Titanium is extremely lightweight, Damascus Steel features unique layered patterns, Black Zirconium offers a deep black finish and Stainless Steel provides strength with a classic silver tone. You can compare all options in our Alternative Metal Wedding Rings Guide.
What is the thickness of the ring?
Our rings are crafted with an approximate thickness of 2 mm. This provides a balanced feel that is substantial enough for durability while remaining comfortable for everyday wear. Each ring is shaped and finished by hand, so there may be very slight variations, but all are designed to maintain a consistent and comfortable profile.
How can I check my size before ordering?
There are several ways to confirm your size: you can be measured at any jeweller and ask for the internal diameter, order a ring gauge yourself and let us know the result, use a ring that already fits and send it to us, or request one of our free ring sizers at checkout.
We’ll confirm any sizing details with you before we begin
What happens after I place my order?
After you order, we review your details and begin crafting your ring. If anything needs clarifying, we’ll contact you directly. Once complete, your ring is carefully packaged and sent via tracked UK delivery. You’ll receive tracking details as soon as it’s dispatched.
How long does it take to make a ring?
Most rings are ready within 2–3 weeks, but we recommend allowing 4 weeks before your wedding. Need it faster? Just let us know.
Is engraving included?
Engraving is always free. We can add names, dates, or even your own handwriting inside your wedding ring. To know more about handwriting engraving, take a look at this blog. . If the option is showing on the product listing, it is engravable.
Who actually makes my ring?
Every ring is made to order in our Scottish workshop by hand by Graeme, or G as he is known. We don’t outsource production or hold bulk stock. Your ring is crafted individually once your order is placed, then finished, checked and prepared for dispatch.
What are your return policies?
Because each ring is made to order in your chosen size and finish, returns are not available once production begins. We provide a complimentary ring sizer before crafting to ensure a confident fit.